Author Topic: Wheel removal and refitting from the service manual  (Read 2344 times)

0 Members and 1 Guest are viewing this topic.

#10

Offline ratman111

  • ZH2 Member
  • **
  • Posts: 20
  • Country: de
  • Town / City: Pyrbaum
Re: Wheel removal and refitting from the service manual
Reply #10 on: October 18, 2020, 09:41:18 AM
Hello JTL, thank you very much for your message. I will try to send the torque list. :763: :821:

#11

Online JD

  • ZH2 Pro
  • ***
  • Posts: 111
  • Country: us
  • Bike: ZH2 CRF KXF YZF XRM
  • Town / City: Dallas TX
Re: Wheel removal and refitting from the service manual
Reply #11 on: October 18, 2020, 10:00:29 PM
*Originally Posted by JD [+]
I saw 92 ft lbs on the axle. Didnt see the caliper bolt spec so i just adjusted the wrench before I removed it until it didnít click and used that setting. 22 on the little one and 42 on the big one.
I guess that method didn't work too well. 16 and 20 Ft lbs according to the manual. I set my wrench at 20-24-26-30 and it kept clicking until I got up to 40, then it spun a bit, so that's the number I used. I'm lucky I didn't snap it off.
Life is short.. better ride fast