Author Topic: My full build with SLR Flash  (Read 613 times)

0 Members and 1 Guest are viewing this topic.

Offline Bullfrog z h

  • ZH2 Member
  • **
  • Posts: 19
  • Country: us
My full build with SLR Flash
on: September 16, 2021, 12:09:03 AM
Sprint Filter P08 F1-85

Stage 3 is a 23 tooth lower gear & a 23 tooth upper gear which gives 14% overdrive from stock

Turbosmart Blow off valve

Intercooler Kit

fuel pump & 1:1 rising rate regulator

Dynojet Power Commander with auto tune

Clutch Conversion Kit for Ninja H2

Alien Head Full System 14" Muffler

Window Link Kit Adjustable

E85 race fuel

H2 injectors

Bst carbon fiber rims

DME swingarm 20in

SLR-TUNING ECU

#1

Offline Jamied

  • ZH2 Member
  • **
  • Posts: 76
  • Country: us
  • Town / City: North Jersey
Re: My full build with SLR Flash
Reply #1 on: September 16, 2021, 12:47:34 AM
Dang Bullfrog z hÖ..get some!
  To be honest Iím looking at an estimated 185hp +/- 5hp, my tune was custom street and has the throttles closing to 90% to flat line the hp from 12200 to a 12800 redline. Iím going to make up differences with camshaft swaps. This is the first of 3 cam tests and the final camshafts will be made by WebCamshaft to my specs, Iím scheduled to dyno test on Friday. I donít want to push over 210hp, I want to make gains ďunder the curveĒ so to speakÖ
Last Edit: September 16, 2021, 12:50:16 AM by Jamied

#2

Offline Bullfrog z h

  • ZH2 Member
  • **
  • Posts: 19
  • Country: us
Re: My full build with SLR Flash
Reply #2 on: September 16, 2021, 01:00:27 AM
I'm strictly setup or quarter mile and a half mile racing.

Fingers crossed hopefully I get over 250 rear wheel horsepower.

#3

Offline Garron

  • ZH2 Pro
  • ***
  • Posts: 141
  • Country: au
  • Bike: Z H2
  • Town / City: Victoria
Re: My full build with SLR Flash
Reply #3 on: September 16, 2021, 01:07:42 AM
*Originally Posted by Bullfrog z h [+]
Sprint Filter P08 F1-85

Stage 3 is a 23 tooth lower gear & a 23 tooth upper gear which gives 14% overdrive from stock

Turbosmart Blow off valve

Intercooler Kit

fuel pump & 1:1 rising rate regulator

Dynojet Power Commander with auto tune

Clutch Conversion Kit for Ninja H2

Alien Head Full System 14" Muffler

Window Link Kit Adjustable

E85 race fuel

H2 injectors

Bst carbon fiber rims

DME swingarm 20in

SLR-TUNING ECU
Hey Bullfrog, how do you like the BST rims? Did you go with the ceramic bearings as well? Iím thinking about getting the gloss green rims. Can you post a few pics to see how they look?  :028:

#4

Offline Bullfrog z h

  • ZH2 Member
  • **
  • Posts: 19
  • Country: us
Re: My full build with SLR Flash
Reply #4 on: September 16, 2021, 01:26:49 AM
I absolutely love bst carbon fiber rims with the ceramic bearings. They roll very nicely and look awesome.




#5

Offline linkdead

  • ZH2 Member
  • **
  • Posts: 16
  • Country: us
Re: My full build with SLR Flash
Reply #5 on: September 16, 2021, 01:36:51 AM
How is the Autotune working?  I have it setup on my VMAX and I'm considering installing it on the Z H2 now that I have a full exhaust that can support a wideband sensor.

#6

Offline Bullfrog z h

  • ZH2 Member
  • **
  • Posts: 19
  • Country: us
Re: My full build with SLR Flash
Reply #6 on: September 16, 2021, 01:44:42 AM
I really like the auto-tune especially that I'm running E85. With the climate-changing throughout the seasons. I can make the proper adjustments as needed.

#7

Online ZEEEE_H2

  • ZH2 Member
  • **
  • Posts: 36
  • Country: us
Re: My full build with SLR Flash
Reply #7 on: September 17, 2021, 08:27:20 PM
*Originally Posted by Bullfrog z h [+]
I really like the auto-tune especially that I'm running E85. With the climate-changing throughout the seasons. I can make the proper adjustments as needed.


Is there an autotune solution without running a PCV or similar? I live around the Rockies and between the elevation & atmospheric conditions, I know the bike wont always be running at peak performance.